Issue approved by Decree State Committee USSR on Labor and Social Affairs and the Secretariat of the All-Union Central Council of Trade Unions dated January 31, 1985 N 31 / 3-30
(as edited by:
Decrees of the USSR State Committee for Labor, the Secretariat of the All-Union Central Council of Trade Unions dated 12.10.1987 N 618 / 28-99, dated 18.12.1989 N 416 / 25-35, dated 15.05.1990 N 195 / 7-72, dated 22.06.1990 N 248 / 10-28,
Decrees of the State Committee for Labor of the USSR 12/18/1990 N 451,
Decrees of the Ministry of Labor of the Russian Federation of December 24, 1992 N 60, of February 11, 1993 N 23, of July 19, 1993 N 140, of June 29, 1995 N 36, of June 1, 1998 N 20, of May 17, 2001 N 40,
Orders of the Ministry of Health and Social Development of the Russian Federation of July 31, 2007 N 497, of October 20, 2008 N 577, of April 17, 2009 N 199)

Fire extinguisher charger

§ 66. Fire extinguisher charger (2nd category)

Job Description. Performing preparatory work for checking, repairing, charging and recharging foam, powder, carbon dioxide and freon aircraft fire extinguishers. Acceptance, initial inspection, discharge of fire extinguishers, cleaning and washing of cylinders, painting and preparing them for testing. Unpacking flasks and boxes with charges, cleaning them from packaging materials. Preparation of solutions for charging fire extinguishers. Hydraulic testing of hulls, charging and rejection of defective fire extinguishers, repair of cylinders, fittings and safety devices under the guidance of a fire extinguisher charger of a higher qualification.

Must know: principle of operation of foam, powder, carbon dioxide and freon aircraft fire extinguishers various types; purpose and conditions for the use of tools and instrumentation when testing and charging fire extinguishers; properties of chemical charges, rules for their transportation and storage; methods of discharging and charging fire extinguishers, painting and repairing hulls and fittings.

§ 67. Fire extinguisher charger (3rd category)

Job Description. Charging and recharging of foam, powder, carbon dioxide and freon aircraft fire extinguishers. Checking the quality of the charge, serviceability of fittings and safety devices. Hydraulic testing of hulls, repair of cylinders, fittings and safety devices, rejection of faulty fire extinguishers. Keeping records of charged fire extinguishers and registration of established technical documentation. Maintenance of charging station equipment, compressors, pumps and instruments when charging fire extinguishers and testing cylinders. Maintenance of serviced equipment and participation in more complex types of repairs.

Must know: installation of foam, powder, carbon dioxide and freon aircraft fire extinguishers of various types; chemical composition and properties of the components included in the charges of fire extinguishers; rules for checking and testing cylinder bodies, valves and safety devices; conditions for transporting fire extinguishers; types of charging stations; the principle of operation of devices and devices used when charging fire extinguishers; the procedure for issuing technical documentation for charged fire extinguishers.

FIRE EXTINGUISHER CHARGER JOB INSTRUCTIONS

I. GENERAL PROVISIONS

1.1. The fire extinguisher charger belongs to the category of specialists.

1.2. The fire extinguisher charger is directly subordinate to __________________.

1.3. The fire extinguisher charger replaces __________________.

1.4. The fire extinguisher charger is replaced by __________________.

1.5. The fire extinguisher charger is appointed to the position and dismissed in in due course current labor legislation by order of the director of the enterprise.

1.6. Must know:

The principle of operation of foam, powder carbon dioxide and freon aircraft fire extinguishers different types;
- the purpose and conditions for the use of tools and instrumentation during testing and loading fire extinguishers;

Properties of chemical charges, rules for their transportation and conservation;

Methods for discharging and loading fire extinguishers, painting and repairing hulls and fittings.

1.7. _________________________________________________________________.

1.8. _________________________________________________________________.

II. JOB DUTIES

2.1. Charges and recharges foam powder, carbon dioxide and freon aircraft fire extinguishers.

2.2. Checks the quality of the charge, serviceability of fittings and warning devices.

2.3. Conducts hydraulic testing of hulls, repairs of cylinders, fittings and warning devices, rejects faulty fire extinguishers.

2.4. Keeps records of charged fire extinguishers and draws up the established technical documentation.

2.5. Serves the equipment of the charging station, compressors, pumps and instruments during loading of fire extinguishers and testing of cylinders.

2.6. Performs current repairs of serviced required equipment and takes part in more complex types of repairs.

2.7. _________________________________________________________________.

2.8. _________________________________________________________________.

III. RIGHTS

3.1. The fire extinguisher charger has the right to:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

Submit proposals for improvement of the work related to the responsibilities provided for in this instruction for consideration by the management.

Within the limits of his competence, report to his immediate supervisor about all the shortcomings identified in the course of his activities and make proposals for their elimination.

To request personally or on behalf of his/her immediate supervisor from the heads of departments of the enterprise and specialists information and documents necessary for the performance of their duties.

Require the management of the enterprise to assist in the performance of their duties and rights.

- _________________________________________________________________.

IV. A RESPONSIBILITY

4.1. The fire extinguisher charger is responsible for:

Improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of Ukraine.

Offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.

Causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

- _________________________________________________________________.

- _________________________________________________________________.

Instructions for the use of fire extinguishers

Content
1. General information
2. Actions of an employee of the organization in case of fire or signs of burning (smoke, smell of burning, temperature increase, etc.)



6. Disadvantages of fire extinguishers.
7. General features of using a fire extinguisher

OTV - fire extinguishing agent
OP - powder fire extinguisher
OS - carbon dioxide fire extinguisher

1. General information.
1.1. Depending on the type of charged fire extinguisher, fire extinguishers are used to extinguish one or more classes of fires, the symbols of which are indicated on the labels of fire extinguishers:

1.2. Portable fire extinguishers used in the organization, depending on the used fire extinguisher, are subdivided into the following types:
- powder (OP):
- gas, including: carbon dioxide (OC).

2. Actions of an employee of the organization in case of fire or signs of burning (smoke, smell of burning, temperature increase, etc.):
2.1. Stop working;
2.2. Turn off electrical equipment;
2.3. Report the incident by phone 01 or with mobile phone 112 to the fire brigade, while it is necessary to give the address of the object, the place of the fire, your last name;
2.4. Take, if possible, measures to evacuate people, extinguish the fire with primary fire extinguishing equipment, and preserve inventory items.

3. Comparative characteristics OP and OU

4. Features of extinguishing fires and fires.
4.1. Powder fire extinguisher
4.1.1. Powder ejection time is 6 to 15 seconds.
4.1.2. When extinguishing fires with powder fire extinguishers, the fire is eliminated as soon as the burning zone is surrounded by a cloud of powder of the required concentration, in addition, the powder cloud has a shielding property, which makes it possible to approach the burning object at close range.
4.1.3. At the very beginning of extinguishing, one should not get too close to the source of the fire, because due to the high speed of the powder jet, there is a strong suction (ejection) of air, which only inflates the flame above the source. In addition, when extinguishing from a short distance, scattering or spraying of burning materials with a powerful jet of powder can occur, which will not lead to extinguishing, but to an increase in the area of ​​the fire.
4.1.4. Powder fire extinguishers are not allowed to extinguish electrical equipment that is energized above 1000 V.
4.1.5. Powder fire extinguishers should not be used to protect equipment that could be damaged by powder (certain types of electronic equipment, collector-type electrical machines, etc.).
4.1.6. Powder fire extinguishers due to the high dust content during their operation and, as a result, the sharply deteriorating visibility of the fire and escape routes, as well as the irritating effect of the powder on the respiratory system, are not recommended for use in small rooms (less than 40 cubic meters).

4.2. carbon dioxide fire extinguisher
4.2.1. Carbon dioxide fire extinguishers must not be used to extinguish fires in electrical equipment energized above 10 kV.
4.2.2. A carbon dioxide fire extinguisher equipped with a metal bell should not be used to extinguish fires in electrical equipment under voltage.
4.2.3. When using carbon dioxide fire extinguishers of all types, it is forbidden to hold the bell with an unprotected hand, since when carbon dioxide escapes, a snow-like mass is formed with a temperature of minus 60-70 ° C.
4.2.4. Carbon dioxide fire extinguishers should be used in cases where effective fire extinguishing requires fire retardants that do not damage equipment and objects (computer centers, electronic equipment, etc.).
4.2.5. When using carbon dioxide fire extinguishers, it must be borne in mind that carbon dioxide in high concentrations in the volume of the room can cause poisoning of personnel, therefore, after using carbon dioxide fire extinguishers, small rooms should be ventilated.
4.2.6. Before using mobile carbon dioxide fire extinguishers, you should limit the number of service personnel who are in the room.

5. Actuation of the fire extinguisher.
5.1. Powder extinguisher.
5.1.1. To activate manual powder fire extinguishers, it is necessary to bring the fire extinguisher to the fire, shake it, then pull out the wedge or pin, sharply press the punch (button with a needle) with your hand to the stop and release it. The exposure time of the fire extinguisher from the moment the punch is pressed to the start of the supply of fire extinguishing powder must be at least 3-5 seconds. Then press the start lever and send a stream of powder into the fire, taking into account the direction of the wind. To stop the powder jet, just release the lever.
5.1.2. Multiple use and intermittent action are allowed.
5.1.3. Direct a jet of fire extinguishing powder at an angle of 20-30 °C to the burning surface.

5.2. carbon dioxide fire extinguisher
5.2.1. To activate manual carbon dioxide fire extinguishers, it is necessary to bring the fire extinguisher to the fire, break the seal and pull out the pin, move the bell to a position convenient for the operator, approach the fire at a safe distance indicated on the fire extinguisher label and press the lever.
5.2.2. The lever allows you to interrupt the supply of carbon dioxide.

6. Disadvantages of fire extinguishers.
6.1. Powder fire extinguisher:
? the absence of a cooling effect during extinguishing, which can lead to repeated self-ignition of already extinguished fuel from heated surfaces;
? the difficulty of extinguishing a fire due to a sharp deterioration in the visibility of the source and evacuation exits (especially in small rooms);
? danger to human health due to the formation of a powder cloud during the extinguishing process;
? damage to equipment and materials due to significant powder contamination of surfaces;
? the possibility of failures in operation due to the formation of plugs due to the ability to clumping and caking of powders during storage;
? the possibility of static electricity discharges during the operation of powder fire extinguishers with a nozzle made of polymer materials which narrows the scope of their application.

6.2. carbon dioxide fire extinguisher
? in high concentrations, carbon dioxide is dangerous to human health;
? the possibility of the appearance of significant thermal stresses in structures when they are exposed to a fire extinguishing agent with a relatively low sub-zero temperature and, as a result, they lose their bearing capacity;
? the possibility of the appearance of static electricity discharges on the socket when the fire extinguishing composition leaves the fire extinguisher;
? danger of frostbite in contact with the metal parts of the fire extinguisher or jet;
? strong dependence of the intensity of the release of fire extinguishing agent on temperature environment.

7. General features of the use of fire extinguishers
7.1. Not allowed:
7.1.1. Operate the fire extinguisher if dents, blisters or cracks appear on the fire extinguisher body, on the shut-off and starter head or on the union nut, as well as in case of leakage of the connections of the fire extinguisher units or if the pressure indicator malfunctions.
7.1.2. Place fire extinguishers near heating appliances, allow direct sunlight on cylinders.
7.1.3. Strike the fire extinguisher or the source of propellant gas.
7.1.4. When working, direct the OTV jet towards people standing close by.

7.2. General rules extinguishing fires:
7.2.1. Before extinguishing a fire, determine the class of fire and use the most suitable fire extinguisher (according to the label of the fire extinguisher).
7.2.2. Extinguish the seat of fire from the windward side, starting from its front edge, gradually moving deeper
7.2.3. Start extinguishing spilled flammable and combustible liquids from the leading edge, directing a jet of powder to a burning surface, and not to a flame;
7.2.4. Extinguish burning liquid pouring from a height from top to bottom.
7.2.5. Extinguish a burning vertical surface from top to bottom.
7.2.6. If there are several fire extinguishers, they must be used at the same time.
7.2.7. Do not bring a class E fire extinguisher near a burning electrical installation within the distance indicated on the extinguisher label.
7.2.8. Make sure that the extinguished hearth does not flare up again (never turn your back on it).
7.2.9. After use, the fire extinguisher must be sent for recharging.

Laboratory work number 16.

Objective: learn how to perform the simplest actions when working with fire extinguishers.

Brief theoretical information: Fire extinguishers are portable (or mobile) devices for extinguishing a fire by releasing a stored extinguishing agent. They are the most widespread and affordable fire extinguishing agents. They are recommended for extinguishing fires at workplaces in technological processes a number of industries, in residential premises, in public and industrial buildings, in transport, etc., therefore they are the primary means of fire extinguishing.

In order to ensure the high-quality operation of fire extinguishers in the fire department, PTORZ is organized - a maintenance, repair and charging point.

It is expedient to place PTORZ at detachments or units of the technical service in order to use an already existing repair base. To organize PTORZ, it is enough to have a room with a total area of ​​40-45 m 2 and 2-3 people for attendants. The whole complex of works on maintenance, repair and charging of fire extinguishers is carried out only by persons who have undergone special training and have permission to do so.

Test questions:

1. Provide requirements for an organization that maintains fire extinguishers.

2. Provide a list of fire extinguisher maintenance work.

3. Give the requirements of labor protection rules for the maintenance of fire extinguishers.

1. Organizations or enterprises engaged in the maintenance of fire extinguishers (hereinafter referred to as the organization) must have a license from the state fire service to carry out this type of work.

The organization must have qualified personnel who have undergone special training in the handling of pressure vessels, maintenance and safe work with fire extinguishers, who knows the current regulatory and technical documentation for fire extinguishers, sources of propellant gas and the types of fire extinguishers used.

The organization for carrying out maintenance work on fire extinguishers must have a workroom equipped with supply and exhaust ventilation (in accordance with current regulations) and the necessary storage facilities.

The organization must have the containers necessary to collect the remnants of fire extinguishers unloaded from fire extinguishers.

An organization carrying out work on recharging fire extinguishers, as a rule, should have necessary equipment for regeneration or disposal of OTV.

The organization must have essential tool for dismantling and repairing fire extinguishers and a safe light source (with a supply voltage of not more than 36 V) for internal inspection of fire extinguishers.

The organization must have safe certified equipment for checking the main parameters of fire extinguishers, fire extinguishers and testing fire extinguishers and their components.

For safety reasons, test equipment should be located in a separate room.

The organization must have a chamber for drying and painting fire extinguishers, a safe system for charging fire extinguishers and cylinders with dry gas, equipment for monitoring the mass and tightness of gas cylinders and fire extinguishers.

The organization must have necessary set labels or tags (clause 12.2), which indicate information about the work performed, the date they were carried out, the brand of the OTV charged into the fire extinguisher, the name of the organization and its legal address.

2. Maintenance includes periodic checks, inspections, repairs, testing and recharging of fire extinguishers.

1. Putting the fire extinguisher into operation.

Before the fire extinguisher is put into operation, it must be subjected to an initial inspection, during which an external inspection is carried out, the complete set of the fire extinguisher and the condition of its installation site are checked (the visibility of the fire extinguisher or the indicator of its installation site, the possibility of free access to it), as well as the readability and intelligibility of the instructions for working with a fire extinguisher. During the external inspection, attention should be paid to:

the presence of dents, chips, deep scratches on the body, control units, nuts and fire extinguisher head;

state of protective and coatings;

the presence of clear and understandable instructions;

the presence of a sealed safety device;

serviceability of the manometer or pressure indicator (if it is provided for by the design of the fire extinguisher), the presence of the necessary stamp and the pressure in the fire extinguisher of the injection type or in the gas cylinder;

the mass of the fire extinguisher, as well as the mass of the fire extinguisher in the fire extinguisher (the latter is determined by calculation);

the condition of the flexible hose (if any) and the OTV sprayer (presence of mechanical damage, traces of corrosion, casting flash or other objects preventing the free exit of the OTV from the fire extinguisher);

the condition of the chassis and the reliability of fastening the fire extinguisher body on the trolley (for a mobile fire extinguisher), on a wall or in a fire cabinet (for a portable fire extinguisher).

Based on the results of the check, the necessary marks are made in the fire extinguisher's passport, it is assigned a serial number, which is applied to the fire extinguisher and recorded in the fire extinguisher register.

2. Quarterly check.

A quarterly inspection includes an inspection of the place where the fire extinguisher is installed and approaches to it, as well as an external inspection of the fire extinguisher (as during commissioning).

3. Annual check.

The annual check of the fire extinguisher includes an external inspection of the fire extinguisher (as during commissioning), an inspection of the place of its installation and approaches to it.

During the annual inspection, the amount of leakage of propellant gas from a gas cylinder or OTV from a gas fire extinguisher is monitored. The fire extinguishers are opened (full or selective), the condition of the filters is assessed, the parameters of the fire extinguisher are checked and, if they do not meet the requirements of the relevant regulatory documents, the fire extinguishers are recharged.

With increased fire hazard object (rooms of category A, B) or when fire extinguishers are exposed to such adverse factors, as positive (over 40 ° С) or negative (below minus 40 ° С) ambient temperature close to the limit value, air humidity more than 90% (at 25 ° С), corrosive environment, vibration, etc. , inspection of fire extinguishers and control of fire extinguishers should be carried out at least once every 6 months.

If during the check a non-compliance of any parameter of the fire extinguisher with the requirements of the current regulatory documents is found, it is necessary to eliminate the causes of the identified deviations of the parameters and recharge the fire extinguishers.

In the event that the amount of leakage per year of the displacing gas or FTA from a gas fire extinguisher exceeds the limit values ​​\u200b\u200bdetermined in clause 5.7 of NPB 155 or clause 5.10 of NPB 156, such fire extinguishers must be taken out of service and sent for repair and recharging.

4. Reloading fire extinguishers.

At least once every 5 years each fire extinguisher and cylinder with a propellant gas must be discharged, the fire extinguisher body must be completely cleaned of the remnants of fire extinguishing agents, an external and internal inspection, as well as a hydraulic strength test and pneumatic testing for tightness of the fire extinguisher body, starting head, hose and locking device, have been carried out.

All fire extinguishers must be recharged immediately after application or if the amount of leakage of the gas exhaust gas or propellant gas per year exceeds the allowable value.

Powder extinguishers during the annual technical inspection selectively(at least 3% of the total number of fire extinguishers of the same brand) are disassembled and the main operational parameters of the fire extinguishing powder are checked ( appearance, the presence of lumps or foreign objects, flowability when pouring by hand, the possibility of breaking small lumps to a dusty state when they fall from a height of 20 cm, moisture content and dispersion). In the event that at least one of the parameters of the powder does not meet the requirements of regulatory and technical documentation, all fire extinguishers of this brand must be recharged.

Powder fire extinguishers used to protect vehicles, must be checked in full at intervals at least once every 12 months.

Powder fire extinguishers mounted on vehicles outside the cockpit or saloon and exposed to adverse climatic and (or) physical factors should recharge at least once a year, other fire extinguishers installed on vehicles, at least once every two years.

About the inspections and tests carried out a mark is made on the fire extinguisher, in his passport and in the register of fire extinguishers.

About the recharging of the fire extinguisher, an appropriate mark on the fire extinguisher(using a label or tag attached to the fire extinguisher), as well as in his passport.

Fire extinguishers sent from the factory for recharging must be replaced with an appropriate number of charged fire extinguishers.

Organizations or enterprises engaged in the maintenance of fire extinguishers, must be licensed by the Ministry of Emergency Situations of Russia for this type of work.

3. At maintenance fire extinguishers, it is necessary to comply with the safety requirements set forth in the regulatory and technical documentation for this type of fire extinguisher.

It is forbidden:

Operate fire extinguishers if there are dents, blisters or cracks on the fire extinguisher body, on the shut-off and starter head or on the union nut, as well as in case of leakage of the connections of the fire extinguisher units or if the pressure indicator malfunctions;

Carry out any work if the body of the fire extinguisher is under the pressure of the propellant gas or vapors of fire extinguishing agents;

Fill the body of the injection fire extinguisher with propellant gas outside the protective enclosure and from a source that does not have a safety valve, pressure regulator and pressure gauge;

Striking a fire extinguisher or a source of propellant gas;

Perform hydraulic (and even more so pneumatic) tests of the fire extinguisher and its components outside the protective device that prevents the scattering of fragments and injury to the staff in the event of the destruction of the fire extinguisher;

Use open fire or other sources of ignition when handling concentrated solutions of individual foaming agents (PO-3AI, PO-3NP, SAMPO, PO-6NP and "Marine"), since they can form explosive mixtures with air;

Perform work with OTV without appropriate respiratory, skin and vision protection;

Discharge freons into the atmosphere or drain foam concentrates without proper processing.

Persons working with fire extinguishers during their maintenance and charging must comply with the safety and personal hygiene requirements set forth in the regulatory and technical documentation for the relevant fire extinguishers, extinguishing agents and sources of propellant gas.

Similar information.

1.1 This job description defines the functional duties, rights and responsibilities of the fire extinguisher charger.

1.2 The fire extinguisher charger belongs to the category of specialists.

1.3 The charger of fire extinguishers is appointed to the position and dismissed from the position in accordance with the established procedure by the current labor legislation by order of the director of the enterprise.

1.4 Relationships by position:

1.4.1	direct submission	Head of the institution
1.4.2.	Additional submission
1.4.3	Gives orders
1.4.4	The employee replaces	Person appointed by order of the director of the enterprise
1.4.5	The employee replaces

1. Qualification requirements for the fire extinguisher charger:

2.1.	Education*	Vocational
2.2.	work experience	At least 1 year
2.3.	knowledge	the principle of operation of foam, powder carbon dioxide and freon aircraft fire extinguishers of various types; the purpose and conditions for the use of tools and instrumentation during testing and loading of fire extinguishers; properties of chemical charges, rules for their transportation and preservation; methods of discharging and loading fire extinguishers, painting and repairing hulls and fittings.
2.4.	skills
2.5.	Additional requirements	For the charger of fire extinguishers of the 3rd category

Requirements for a fire extinguisher charger:

2nd category: Vocational education or complete general secondary education and professional training in production. No work experience requirements.

1. Documents regulating the activities of the fire extinguisher charger

3.1 External documents:

Legislative and regulatory acts relating to the work performed.

3.2 Internal documents:

Charter of the enterprise, Orders and instructions of the director of the enterprise (head of the department civil defense); division regulations, Job description fire extinguisher charger, internal labor regulations.

1. Job Responsibilities of a Fire Extinguisher

4.1. Charges and recharges foam powder, carbon dioxide and freon aircraft fire extinguishers.

4.2. Checks the quality of the charge, serviceability of fittings and warning devices.

4.3. Conducts hydraulic testing of hulls, repairs of cylinders, fittings and warning devices, rejects faulty fire extinguishers.

4.4. Keeps records of charged fire extinguishers and draws up the established technical documentation.

4.5. Serves the equipment of the charging station, compressors, pumps and instruments during loading of fire extinguishers and testing of cylinders.

4.6. Performs current repairs of serviced required equipment and takes part in more complex types of repairs.

1. Fire extinguisher charger rights

The fire extinguisher charger has the right to:

5.1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

5.2. Submit proposals for improvement of the work related to the responsibilities provided for in this instruction for consideration by the management.

5.3. Within the limits of his competence, report to his immediate supervisor about all the shortcomings identified in the course of his activities and make proposals for their elimination.

5.4. To request personally or on behalf of his/her immediate supervisor from the heads of departments of the enterprise and specialists information and documents necessary for the performance of their duties.

5.5. Require the management of the enterprise to assist in the performance of their duties and rights.

1. Responsibility of the fire extinguisher charger

The fire extinguisher charger answers:

6.1. For improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of Ukraine.

6.2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.

6.3. For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

1. Working conditions for a fire extinguisher charger

The operating mode of the fire extinguisher charger is determined in accordance with the Internal Labor Regulations established at the enterprise.

1. Terms of payment

The terms of remuneration for a fire extinguisher charger are determined in accordance with the Regulations on remuneration of personnel.

9 Final provisions

9.1 This Job Description is made in two copies, one of which is kept by the Company, the other by the employee.

9.2 Tasks, Responsibilities, Rights and Responsibilities may be specified in accordance with the change in the Structure, Tasks and Functions of the structural unit and workplace.

9.3 Changes and additions to this Job Description are made by order CEO enterprises.

Head of the structural subdivision
		(signature)	(surname, initials)
AGREED:
Head of the legal department
(signature)	(surname, initials)
00.00.0000
Familiarized with the instructions:
		(signature)	(surname, initials)
		00.00.00