What is the name of the slime solution. How to make a slime without glue and water? Slime from the water.

Slime is an amazing and slightly strange toy. In fact, it is just a lump of elastic substance. But kids love slimes because they can be crushed, squeezed, pulled, twisted, thrown, and smeared. And after all these actions, the slime, as if nothing had happened, returns to its previous form. Even dirty traces, to the delight of parents, will not remain from such a toy.

Where did the slime come from?

For the first time, a batch of slimes was released by the American company Mattel back in 1976. The toy gained immense popularity eight years later, after the Ghostbusters, where the character Lizun was.

Since then, many have tried to make slime at home, and quite successfully. Instead of guar gum, craftsmen and inventors used a variety of substances. A homemade slime will not come out exactly the same as a purchased one, but it will definitely have “fluid” properties.

What do you need to make it at home?

Thick slime recipe with PVA glue

Dry borax should be dissolved in a glass of water. You can use a ready-made tetraborate solution, then you do not need to mix it with water. In another cup, mix the remaining water (a quarter cup) with one fourth cup of PVA. Add dye. While stirring the adhesive mass, gradually pour half a glass of borax solution into it. It remains to knead this jelly-like mass well - and a wonderful do-it-yourself slime is ready! The process is shown in more detail in this video.

Recipe based on shampoo and glue, without sodium tetraborate

It happens that there is no borax in the house, but you don’t want to go to the pharmacy to get it. The previous recipe has a popular alternative. Lizun without sodium tetraborate can be made using ordinary shampoo and Titan glue. Only this brand of glue is needed.

For three parts of glue, two parts of shampoo are taken. It is best to mix the shampoo slime in a plastic bag. When the mixture thickens, try what happened. Sometimes you have to add more glue.

Another slime recipe without PVA glue contains plasticine at the base. You will need plasticine of any color, gelatin powder, half a glass of water.

1. First you need to prepare the jelly, following the instructions on the pack. Pour it still warm and warm into a clean, separate bowl.
2. Boil 50 ml of water and switch the stove to low heat.
3. 100 - 120 grams of plasticine should be broken into pieces and gradually thrown into the water. Stir constantly.
4. When the plasticine has completely melted, gelatin will need to be added to the mass and stirred again.

Making a plasticine slime is easy, but the craft will last a maximum of two days. Plus, it will get your hands dirty. If you want to sculpt from any elastic substance, it is better to buy ball plasticine.

Many people want to learn how to make a slime without using glue. There is a way, but it is not simple. Mandatory ingredients are polyvinyl alcohol (in dry form), a glass of water, a couple of tablespoons of borax.

Polyvinyl alcohol in powder can sometimes be found under the name "Antimelitel". It is found in construction markets, in a chemical store, sometimes in haberdashery (used for dyeing fabrics).

To make a slime according to this recipe, you need to do this:

1. Alcohol powder is poured into an iron dish, put on fire.
2. Alcohol is brewed for 40 - 45 minutes. It needs to be stirred frequently. After cooking, the dishes are cooled.
3. Then you need to dissolve the dry borax powder in warm water. The crystals should dissolve within 20 minutes.
4. For three parts of polyvinyl alcohol, one part of the borax solution is taken. The mixture will soon turn into a slime.

You can tint the slime, add essential oil for smell. The licker will be durable and cute.

other methods

There are several ways to make slime at home. They are low-cost, but the resulting toys do not look very nice and are not stored for long. For example, liquid slime can be made from baking soda or starch. It will harden on the third or fourth day.

But without water and glue, it will not be possible to make a slime. You need at least one of these components. It is impossible to make a slime toy out of paper, because it does not have flexibility. Only the image of the same Lizun from Ghostbusters can be paper.

But to create a slime that glows in the dark, everyone is quite capable. To do this, you just need to add fluorescent paint to the usual composition. It is sold in craft stores.

Many are interested in the question: how to make a slime from plasticine, gelatin and other ingredients? It's not difficult at all. Even a child can cope with such a task. The main thing is to know a few simple secrets.

Lizun, or, as it is also called, slim, handgum, is a character from the well-known cartoon "Ghostbusters". He appeared on the screens at the end of the last century. And since then, the slime has become a favorite toy for more than one generation of children. This product was first released by the American company Metel in 1976. And since then, such a property of this toy as the ability to stretch and spread has attracted children.

The industry makes such toys, but it's more interesting to build one yourself! This exciting process, which you can involve the whole family in, is sure to please you.

The easiest and most proven way to make slime is with plasticine.

In order to make it this way, you will need:

• gelatin;
• plasticine;
• water;
• a plastic cup;
• metal container.

After you have prepared everything you need, you can start making handgum. The algorithm of actions is as follows:

1. Dissolve a pack of gelatin in water (it should be cold). This should be done in a metal bowl. Follow the instructions on the pack for this. Leave for 1 hour.
2. After that, put the dishes on the fire and bring its contents to a boil, stirring constantly. Boil gelatin is not necessary!
3. Prepare a piece of plasticine in the color that you like best. Any, even the most inexpensive plasticine, will do. The piece should weigh about 100 g. Knead it very well in your hands.
4. Pour about 50 ml of enough hot water (but not boiling water) into plastic utensils, add plasticine and stir with water until a uniform consistency.
5. Pour the gelatin, mix and refrigerate for a couple of hours. Voila, the slime is ready!

The disadvantage of this recipe is the fact that such a toy will not last long and may get your hands dirty.

handgum from water

An equally well-known method for making a handgam is the following method. If you make a slime out of water, then it will practically not differ from a toy that is sold in stores.

Ingredients you will need:

• PVA glue;
• borax powder or sodium tetraborate;
• food coloring.
• utensils for cooking.

How to make a slime from such components? Here is the prescription:

1. Pour ¼ cup of water at room temperature into the container.
2. 100 ml of PVA glue is added. The main secret: the glue must be very fresh and not too liquid. Therefore, if the glue did not seem too thick to you, you can add a little more of it than indicated in the recipe.
3. Borax is added. This substance can be purchased at any pharmacy, it is inexpensive. If you are using a liquid (i.e. sodium tetraborate), then take one vial. If it is a powder, then you need to take 1 tbsp. l. and pre-dissolve in 100 ml of cold water.
4. Add dye of the color you like.
5. Pour all this liquid into a bag and mix thoroughly. Slime from the water is ready!

It is advisable to keep the finished toy in the refrigerator so that it all becomes elastic and does not stick too much to your hands.

Other ways to make slime

You can make a slime without borax. In this case, you need the usual baking soda. The disadvantage of such a toy is that it is short-lived and will live a maximum of 3 days.

So, you will need:

• PVA glue;
• baking soda;
• dye;
• container for mixing ingredients.

Start the manufacturing process:

1. Mix ¼ cup of water at room temperature and 50 g of PVA glue.
2. Add dye to the resulting liquid.
3. In a separate container, mix a tablespoon of soda and ¼ cup of water.
4. You mix all the ingredients. Slime is ready.

You can also make such a toy out of shampoo. Mix titanium glue and shampoo in equal proportions, add dye. Handgam is ready!

And here is perhaps the most harmless way to make such a toy. It will need starch and water. These components must be mixed in equal proportions and dye added. Everything, the toy is ready.

There are several ways to make slime. Which one to choose is up to you. It might be worth trying different ways of making the slime to compare them and determine which one is the best. You can add a few drops of essential oil to the composition from which you make the toy. Then it will smell good. You can also make a slime that glows in the dark. To do this, add fluorescent paint. You can easily find it in craft stores.

Lizun is a wonderful toy that develops fine motor skills and imagination of your baby. And if at the same time it is also made with your own hands, then in this case it will certainly bring a lot of positive emotions!

Which of the children, and even adults, will deny themselves a funny game with a slime? It will take a little time to make it with your own hands, and even fewer materials will be needed. There are several ways to make such an interesting toy from scrap materials.

• Half a teaspoon of boron.
• A small bottle of colorless glue.
• Any harmless dye.
• Water.

To prepare the mass, from which the slime will eventually turn out, you need to take any two deep bowls. Be sure to need two containers, because a two-part solution is being prepared. Pour a glass of water into one bowl (take warm water) and add boron. The resulting mass should be well mixed to obtain a homogeneous consistency.

In the second bowl, you need to mix 100 milliliters of water, 30 grams of discolored glue. To give color, use a dye, it must be added at this stage. Once again, mix everything well.

Then you should mix the two components. To do this, carefully pour the contents of the first bowl into the second. In the process of connecting the two parts, the slime will gradually begin to acquire the correct consistency, and the whole mass will be stretchy.

The process of preparing the slime is over, you can start exciting games, most importantly, make sure that the children do not try it with their mouths. You need to store such a slime in a well-closing container.

Making slimes from glue and starch

Making slime from glue and starch with your own hands

Another option that is even simpler than the previous one.

• Liquid starch.
• PVA glue.
• Plastic bag.
• Dye.

Lizun - This is a toy for children, so all materials should be as natural as possible. If there is no food coloring, you can replace it with gouache paints. Be careful, if the child is allergic to any dyes, you can make the slime colorless. Special attention you need to pay attention to the production time of the glue, it must be fresh, the slime will not work out of the old glue.

You need to take a tight plastic bag and pour about 70 milliliters of liquid starch into it. Often such starch is used during washing, this is how it differs from food starch. If this is not the case, then you can take the usual one, only it should be diluted: one part of water to two parts of starch.

Following the starch, send a few drops of natural dye into the bag, the main thing is not to overdo it, otherwise, during the games, the slime will stain not only the hands, but also the surface.
Next, you need to add about 25 grams of PVA glue (be sure to mix the bottle with glue well beforehand).

Now it is good to close or tie the bag and mix thoroughly until the contents look like a thick mass.

You may not be able to achieve the right consistency right away. Don't despair right away, because the alteration will only take a few minutes. The main thing is to find a middle ground and mix all the ingredients in the right proportions.

Store also in a closed container to protect from dust. The service life of such a slime is about a week.

Lizun from soda

Such a toy can be given to children only in the presence of adults. This is due to the fact that it contains detergent. It is necessary to make sure that after the games the child thoroughly washed his hands.

• Detergent.
• Baking soda.
• Water.
• Natural dye.

Pour a small amount of detergent into the prepared dishes, add water and dye. With these ingredients, you can also adjust the density of the resulting mass simply by adding water or detergent.

In the resulting mass, add soda and mix well. The resulting mixture should have sufficient density. If too much soda is added, you can dilute it with water to the desired consistency.

The color of the resulting slime can be adjusted by adding dyes. That's all, the soda slime is ready for play. Make sure that the child does not taste such a toy.

Another easy way to make slime.

• Your favorite shampoo
• Shower gel or dish detergent.

In prepared dishes, mix equal amounts of shampoo and shower gel or dish detergent. All ingredients should be of a homogeneous consistency, and not contain any additional substances, such as scrub particles, which are often added to shower gels. The color of the slime you get will depend on the materials used.

All components must be mixed well and put them in the same container in which they were mixed in the refrigerator. The resulting mass should be there for at least a day, only after this time the slime will harden to the correct consistency, and it will be possible to play with it. It must be stored only in the refrigerator so that it does not melt and does not lose its shape, in a closed container.

Make sure that the slime stays clean, if there is a lot of dust on it, then it should be thrown away and a new one should be prepared. This toy will last about one month.

Making such slimes at home is not difficult. The only nuance that needs to be taken into account is that for its manufacture you need to take a non-flowing washing powder, but a gel-like one. Unfortunately, it is impossible to replace it with liquid soap or shower gel, because these products contain other components.

• Gel laundry detergent.
• Office glue.
• Natural dye.
• Medical or other thin rubber gloves.
• Storage container.

It is necessary to pour about one-fourth cup of clerical glue into the prepared container. Glue can be more or less, it depends only on your preferences in the size of the slime. The more glue, the bigger slime you get.

Add a natural dye of the desired color to the glue and mix the components well so that the glue acquires a uniform color.

In the resulting mass, you need to add 40 grams of gel-like powder. Again, mix well the resulting mass. Over time, this mass will become sticky and will have the consistency of putty. Make sure that the mass does not get too thick. If this happens, then a few drops of powder should be added.

Next, you need to put on gloves, get the resulting mass from the container and start kneading. The process is approximately the same as if you were kneading dough. During kneading, excess liquid will come out of the slime, if any, and the mass will become soft and elastic.

Store the resulting slime in a tightly closed container. If you notice that it has begun to melt or has become too soft, then you can send it to the refrigerator.

Slime from flour

This cooking option is most suitable for young children. If you use dyes from natural substances, then it becomes completely harmless and not dangerous to the health of the baby. The only disadvantage of these dyes is that they are not so bright, but harmless.

• Regular flour.
• Hot water.
• Cold water.
• Natural dye.

It is necessary to take a small bowl and pour 400 grams of flour into it. You can sift it through a sieve, so the future mass will be more homogeneous and easier to knead.

Then we add a quarter cup of warm water to it, it should be just warm, you can not pour boiling water.

When the mass is well mixed, you can add a few drops of natural dye to it and mix well again. As a result, the mass should turn out sticky.

We send to a cold place for 4 hours. When the whole mass has cooled down and acquired the desired shape, you can let the children play.

A very interesting slime can turn out if you make it magnetic, it also has the property of glowing in the dark. There is no need to buy such a slime in the store, you can easily make it yourself.

• Already familiar boron.
• Water.
• Office glue.
• iron oxide.
• neodymium magnet.

Mix everything very carefully until the boron is completely dissolved in water. It's cooked in one pot.

In the second bowl, you need to mix 10 milliliters of water and 30 grams of stationery glue. As before, everything is mixed very well and a coloring matter is added to the resulting mass. If you add paint at this stage, which contains phosphorus, you get a slime that glows in the dark.

Carefully mix the two components of the future slime into a homogeneous mass. The main thing is not to rush and mix everything well, then the mass will turn out to be the desired density.

The mass that turned out must be decomposed on a flat surface, and iron oxide should be added to its middle.

Lizun, which will be magnetized, is ready. Now it can be moved with a magnet on a flat surface.

Sometimes such situations happen that it seems that all the ingredients are correct and they did not deviate from the instructions, but the slime still did not work out. It's all about the parts you used to make it. Each material is significantly different, different manufacturers, using the same components, can produce a product at the output that is not similar to its counterpart. Therefore, you should not strictly adhere to the described proportions, depending on your materials, their amount may differ. Don't give up right away, just experiment.

A slime that meets all standards should be removed in a homogeneous mass without much effort from the dishes where you store it.

If your toy is very sticky, this can be seen from the threads that will follow the spoon. When you touch it with your fingers, it is too sticky and does not lag behind well, you need to dilute it slightly. This can be done with your own hands using water or starch.

When your slime stretches, but practically does not stick, it means that, on the contrary, there is too much liquid. To give density, you need to add a little glue or the main ingredient that was used for cooking.

Do not be afraid to experiment, only by trial and error you will be able to choose the right consistency, and your children will enjoy a new, and most importantly, toy that is absolutely not harmful to the baby's health.
Watch the video: "LIZUN" at Home
For more crafts, see the Crafts section. See you on the pages of our site.

With the ability to stick to hands and surfaces, change shape depending on the imagination, the Lizun toy has earned great popularity among children. She brings them simply into indescribable delight. And so today I decided to deal with the question: how to make a slime.

Lizun is the case when most adults treat children's fun without much joy. But what to do if the kids are crazy about a copy of the cartoon character from the acclaimed "Ghostbusters"?

There is only one answer - to understand and accept the passion of the younger generation. And also remember your childhood, and help make a slime at home.

Dear mothers and fathers, grandfathers and grandmothers, let's try to celebrate positive sides childish attachment to a evasive toy. This will undoubtedly make her more attractive to us.

Firstly, the slime is useful for kids, as playing with it develops hand motor skills and imagination. Adults, by the way, can also massage their hands.

Secondly, there is an additional free time when a child tries to calm down a naughty slime (whatever the child amuses, if only he does not cry).

Thirdly, money is saved in the manufacture of a sought-after toy in an independent way. And, finally, the most important thing is the unforgettable minutes spent with the baby on making a fascinating creature in a cozy home environment.

After all, there is no greater happiness for both adults and children than interesting communication for joint work.

It will not be difficult to create a slime with your own hands and bring joy to the baby. The main thing is to have a desire and some materials at hand.

Let's get down to action, and be content with the invention of an unusual hero - a spreading, sprawling, escaping slime.

The standard slime, let's call it classic, is made from PVA glue, borax (aka sodium tetraborate) and water. It's quick and easy, and the toy is wonderful: repelled by all surfaces and resilient.

A sort of jumper, while remaining soft. This craft can even be washed, it is not afraid of moisture.

Sodium tetraborate can be purchased at pharmacies, in radio departments. Buy a solution of four percent, you can also use powdered, which is diluted as follows - 1 tbsp. a spoonful of half a glass of water.

We prepare a set of components:

• PVA glue - one hundred grams (white), with a suitable period of use
• Sodium tetraborate (bottle)
• Dyes to choose from - in the form of gouache, brilliant green, acrylic paints, food dyes
• Cookware with a size of more than half a liter
• Wooden stick for stirring.

Making children's fun

The toy is ready for battle. It's just like a store. No, even better - because it was created by hands caring parents to the joy of the child!

It is worth adding some comments in order for the slime to turn out to be original, and for a long time served a happy baby.

1. It is necessary to keep the slime in a box that is tightly closed with a lid.
2. Leaving the toy in the sun or near heating devices is not recommended.
3. It is also not advisable to place the created slime on fleecy surfaces (carpets, clothes), which will ruin a smooth and even toy, and our baby will be upset.
4. Droplets of essential oils will give a zest to the man-made creation. The enchanting aroma will delight children.
5. Do not regret cosmetic sparkles - the slime will become charming, even somewhat glamorous from their small amount.
6. Drop a little vinegar into the solution - the slime will become more plastic and viscous. And the paint will not stay on your hands.
7. A small amount of glycerin drops will make the homemade product look like a cartoon prototype - it will become slippery.
8. The added hydrogen peroxide will turn the craft into a light and airy substance.

What do home conditions mean? The presence of components that are always at hand. These materials are baking soda and PVA glue. Just something, but how much joyful children's squeal in response!

Assembling the toy set:

• PVA glue - 50 gr.
• Soda - one tablespoon
• Food coloring - eat well, no - you can do fine without it
• Plastic container - 2 pcs.
• Wooden stick for stirring
• Rubber gloves
• Half of 1 tbsp. water (necessarily warm).

Step-by-step creative production of slime in a homely atmosphere:

The whole business is - and the slime is ready!

It should only be noted that the slime made of glue and soda is not very durable. They will probably play no more than four days. But this has its advantages - you can cook fresh, which will be distinguished by cleanliness and sterility.

There was no tetraborate, and the child wants a lick that looks like a store? No problem, we'll do it. For these purposes, we will find liquid starch (used for washing) and PVA glue. The slime will be as it should be - viscous and vague.

We will need:

• PVA glue - a quarter of a bottle (not expired)
• Liquid starch - a third of the bottle (you can dilute ordinary starch with water, with proportions one to one)
• Dye - what is at hand
• Mixing bag.

Manufacturing:

1. Define liquid starch in the bag.
2. Add some dye.
3. Send glue.
4. Stir the mixture - you can even with your hands.
5. Make sure that the mass becomes homogeneous, at the same time make sure of the color. Not enough color - add colors to the desired effect.
6. Send the package to a cold place for three to four hours.

The hours have flown by - the slime is ready for fun games. He turned out perfect! The child will be delighted. What else is needed for happiness?

One of the environmentally friendly methods of creating children's fun is from ordinary water with the addition of starch. Lizun comes out wonderful, it’s not scary to give it to your beloved child.

For crafts from water you will need:

• Starch
• Water (must be warm)

The components are taken in a one-to-one ratio.

The manufacturing process is very simple, as is the set of components: water is mixed with starch, a ball is formed. Homemade is ready.

Optionally, it is possible to add dye, sparkles, essential oil. This will greatly embellish the homemade miracle - yudo.

This is the easiest way to create slime. It comes out very reliable, which makes the kids immensely happy.

For creativity you need:

• Glue called "Titan" - 90 gr. It is better to choose just such, and certainly with a suitable period of use.
• Shampoo - 30 gr. Any, even the most inexpensive, will come in handy
• Any dye. The type of dye depends on what color you want to give your homemade fidget
• Gloves
• Plastic bag.

Step by step creative process

Lizun (slim, handgum) is a toy that became known to the general public not so long ago thanks to the release of the well-known film "Ghostbusters".

One of the main characters of this cartoon picture was a ghost named Lizun.

Its creators are Mattel, which released it under the name Slime.

Lizun began to call this toy after the translation into Russian.

Its peculiarity is that it was able to stretch, spread and take any shape.

Surely in childhood, many had such a toy that could be thrown at a wall or other object, and it invariably stuck to it.

Making slime at home: is it possible?

An extraordinary and very curious Lizun very quickly gained popularity among the kids, which immediately led to its mass release around the world. Slimes are still popular today. You can buy this funny toy in the store, but it's much more interesting to make it yourself. If you want to please your baby, but do not know how to make a slime at home, after reading this article you will have no questions left.

Making such a toy at home from improvised material is as easy as shelling pears. The most used methods: with shampoo, water, plasticine and soda, with or without sodium. In addition, you will have the opportunity to independently adjust the density of the toy and paint it in the desired color using food coloring or gouache.

How to make a slime at home: materials needed

How to make a slime at home, and what materials are needed for this? The choice of materials is very large, it includes:

• water with starch;

• condensed milk (to give the toy taste).

This is far from full list materials, but we will talk more about this below. Now we recommend that you familiarize yourself with the basic recommendations and tips for making toys, if you want to end up with a quality toy. The list looks like this:

1) the most important condition for storing slime is a closed vessel. For this, a small jar is suitable, in which the lid closes tightly;

2) Do not leave the toy under direct sunbeams, near heaters or batteries (lizun prefers a low temperature);

3) you can not put the slime on a surface with a pile (for example, on carpets and clothes), since miniature fibers tend to stick to it, which will lead to a heterogeneity of its surface;

4) to make the toy unique, add some essential oils to the recipe during its creation, they can give a pleasant aroma to your creation;

5) to make the slime even more original, you can add a certain amount of cosmetic sparkles to the mass being prepared, this will give your cartoon superhero a little “glamour”;

6) to make the craft more palatable, you can add sugar, salt or condensed milk to the recipe;

7) if you want to make your toy more plastic and viscous, and also so that it does not leave marks, you need to add a few drops of vinegar to the paint solution;

8) to give the cartoon character a natural look, add some glycerin as well, this will make it more slippery;

9) adding hydrogen peroxide will make the homemade slime lighter and more airy;

10) to "revive" the toy, during the manufacture, take a few rubber buttons and stick them on the place where the slime will have eyes and a nose. Everything here will depend on your imagination: use any means at hand and make your homemade craft as believable as possible.

How to make slime at home: recipes

So, we got acquainted with the recommendations and tips, now we have come to the most basic - manufacturing recipes. There are more than enough materials from which to make a slime, but we will consider some of the most popular and simple ways.

Making slime from water

This method is the most popular. The slime that will turn out in the end is not much different from the one sold in the store.

To make it you need:

1) 100 g of PVA glue. It is desirable that the glue is as fresh as possible.

2) A solution of sodium tetraborate (4%), its powder is also suitable. It can be purchased at any pharmacy, it is inexpensive and almost always in stock. In addition, this solution is often used in jewelry workshops, so it can also be found at points where radio products are sold or in shops with chemical reagents.

3) Dye of the desired color. It is advisable to use food, it is safer for human body. Alternatively, you can use gouache or green paint.

Process of creation:

1. Pre-prepare a small container in which you will make a solution for crafts. Pour ¼ cup of lukewarm water into it.

2. Take 100 g of PVA glue and pour it into a container of water. The density of the toy will directly depend on the amount of glue, so here you will need to determine it yourself. If the mixture seems too liquid to you, add a little more glue than necessary. After that, the mixture must be mixed well.

3. Then you need to add sodium tetraborate. If you use a solution, one vial will be enough for 100 g of glue. When using the powder, dissolve 1 tbsp. l. in ½ cup of water and rinse into a container.

4. Add dye at the end.

The mixture is ready. Now take a container with this mixture, pour all the contents into a plastic bag and remember well.

Ready! You have a new toy - a slime made of water.

How to make slime from soda

If sodium tetraborate is not available, then this the way is fine you are the best you can be. But keep in mind that such a slime is short-lived, and it will be possible to play with it for no longer than four days.

Required components:

PVA glue.

If needed, food coloring.

Plastic container.

Stirring stick. If you interfere in manual mode, use rubber gloves.

Creation method:

1) Take a plastic container, and mix ¼ cup of warm water and 50 g of glue in it to make a homogeneous mass;

2) Then add the dye of the desired color and mix everything again;

3) Take another separate container and mix in it ¼ cup of water and 1 tbsp. l. soda;

4) Pour the contents of the additional container into the main container and stir well again.

That's the whole process, the soda slime is ready!

We sculpt a slime from plasticine

This type of toy differs from others in that it has an excellent ability to keep the shape given to it.

To create this type you need:

food gelatin;

plasticine;

container, plastic utensils are best;

additional container made of metal;

spatula for mixing.

Process of creation:

1) first you need to pour a certain amount of cold water into a metal container and add gelatin to it. The required proportions can be read on the package. After that, you need to let the gelatin stand in water for 1 hour;

2) after an hour, you need to put the container on the fire and bring all the contents to a boil. As soon as the water boils, remove the container from the heat;

3) then pick up 100 g of plasticine and remember it well so that it warms up;

4) after that, take a plastic container, pour 50 g of warm water into it and mix the clay in it well with a spatula;

5) then pour all the contents from the metal into a plastic container and mix well until a homogeneous mass is obtained;

6) Put the resulting mixture in the refrigerator until completely cooled.

Everything, the process is completed, you have a plasticine slime.

How to make slime from shampoo

This method is very easy to prepare, but at the same time, it has a significant drawback - reliability. However, this does not prevent him from being popular among the population.

You will need:

Glue "Titan". Choose this particular type of glue, and be sure to check its expiration date, as low-quality glue can ruin the whole end result for you. You can buy it at any stationery or household store;

Shampoo (any brand will do)

Rubber gloves.

The process of creating a toy:

1) Take a plastic bag and pour shampoo and glue into it in a ratio of 2 to 3;

2) Mix the resulting mixture until it finally thickens.

Get a ready-made toy from the package and delight your child!

How to make slime without sodium

If there is no sodium tetraborate at home, you can use this method. To make it, you will need the following ingredients:

warm water;

• dye;

• essential oils.

How is it done

1) take water and starch and mix them in a ratio of 1 to 1;

2) add some dye and mix again;

3) sequins can be used as desired, they are able to give your crafts brightness and unusualness;

4) essential oils will be needed to give your toy a pleasant smell.

Mix all the ingredients listed above and voila - you got a new kind of slime.

In conclusion, I would like to say that the slime is a very exciting toy that can please your child, it can also be used as a gift close person. In addition, the slime is also useful in that it will help develop fine motor skills in the child's hands, and for adults to massage the palms.

Make toys with your own hands, because it is very interesting and informative, people close to you will surely appreciate your efforts.