Description: War Thunder is a next generation military MMO game dedicated to...
There is a certain list of things that every experienced car owner must be able to do, including removing scratches on the bumper - it looks rather complicated, but in fact, an operation that is feasible for almost any motorist. So if you are planning self repair car, you can save money by updating the bumper yourself. But in order to understand how to remove a scratch on a bumper, you first need to classify the existing damage, since defects of varying severity need different repairs.
Apply the paste with a cloth to the damaged paint and tilt it in a circular motion. You can reapply the abrasive or polishing paste and repeat the process until you achieve the desired look for your vehicle. For very deep grooves in the paint, it is recommended to use paste in combination with a grinding wheel. Again, it's best not to use it under direct sunlight. Using abrasive discs, it is necessary to cut the varnish to the undercoat. In addition, apply a special paint mastic that you properly moisturize.
In order to understand how damaged a part of your car is, you do not need to be a professional, it is enough to make a careful inspection of the bumper.
- Scratches and scuffs are barely noticeable - these are the simplest cases, which most often do not even require staining. Moreover, to eliminate such a drawback, the bumper does not need to be dismantled - it is enough to polish the surface right on the spot.
- Large scratches and small cracks are damage resulting from small collisions or bad parking. In order to repair a crack or scratch on the bumper, you can apply local (spot) painting or full painting with the removal of the bumper.
- Dents - appear with strong mechanical stress or as a result of heating. Small indentations can be removed using the same heating, for larger damage, special suction cups are used.
- Tears and breaks are the most serious type of deformation when the integrity of the bumper is violated. Sometimes you can get by with dismantling, welding and further painting, but most often you need to purchase a new part, so we do not consider such cases.
If you have successfully diagnosed the trouble that happened to your car, then you can proceed to the instruction on how to remove a scratch on the bumper.
After drying, the sandpaper will grind with grinding wheels. Flip the autoclaved area with your vehicle's desired tint. If you apply too thick a layer of paint, you will run off and create drips on an undamaged paint layer. The color must be applied at a distance of at least 30 cm from the surface of the body. This prevents splattering of paint and unwanted drops on undamaged areas of the body.
Perfect car without scratched paint!
Damn and scratched car polish can ruin your mood. Whether large or small abrasions, they can always be solved! Deep scratches should be repaired immediately after they have been created to prevent body corrosion due to weather conditions. If you have any questions, need help, or need help with abrasions on your vehicle, please contact us.
Ways to remove scratches
There are many techniques to fix the defect if you scratched the bumper. The most elementary of them are aimed at masking damage to the upper layer when not affected. paintwork. These include polishing pastes with different sizes of abrasive, as well as wax products like pencils that fill cracks with a special substance.
Interested in professional scratch repair?
Don't want to experiment with repairs and waste your time and money on professional car repair accessories? Carefully repair scratches and scrapes on your car while you wait. Even for deeper cocktails, Piotr Tomszek has a very simple recipe. In accordance with the color number, which is indicated either in the technical license or in the ticket directly to vehicle, you can buy a contour pen, which can be ordered for about one hundred and fifty kroons, preferably directly from a car dealer.
Staining is a way to fully damage the production layer of paint. With spot staining, it is enough to remove a layer of paint from one area, sand it well and then apply a new layer of a suitable color. If scratches are visible over the entire area of the part, the entire bumper must be repaired, with the complete removal of the old paint.
With a pencil, it's easy to handle, and for the more experienced car enthusiast, the repaired area still needs to be rubbed down with varnish and wax. If a large area is worn or the metal is damaged, and the repair is more refined, it is not enough to leave the wounded area. Even the size of a five-hundred-year-old man requires a much larger surface, says Piotr Tomszek. “When it comes to a metal shutter or a place where the paint unfolds, a large area needs to be painted, sometimes even the entire repair job.”
Owners of new cars that are still body-covered should also go to repair shops for minor repairs. “The moment a client applies a body contract or a piece of work that has been repaired by a private individual, he has no right to do so,” warns Zdenk Ins from the intelligence service. Thanks to the computer, we can check if the car has really been repaired in the main service, and if not, then the motorist has to pay for the repair and repair of his own pocket, and this also applies to the use of poor or already used spare parts. that only original parts give one hundred percent certainty.
The deepest scratches without breaks require surface restoration, for which several layers of putty are used. Instructions for using all these methods are provided below.
wax pencil
For those who scratched the bumper only slightly, it will be enough to purchase a wax pencil. Before using it, it is imperative to clean the bumper with special tools, and then degrease it with a solvent.
On the other hand, it's true that for owners of older cars, the services of a retailer don't need a luxury, with repairs usually only handled with a bit of expert painting and sharpening. When the original has just broken or parts are missing, it's best to fix it a thousand times over, Inject. On the other hand, even in the case of a bonded joint, the overall flexibility of the material can be maintained, on the other hand, hardened plastics are bonded with two-component adhesives, which, after curing, have the hardness of a metal.
After repairing a repaired pistol, it is usually impossible to see the repair at a glance, perhaps after disassembly. Everyone can experience the same situation. They have experience right on the wreck, or they just ask for broken glass. Who buys a used headlight should be careful to have all the brackets and make electrical or mechanical adjustments possible. This also applies to taillights or flashing lights, which often tend to lock into place.
It is best to use a wax marker at a moderate temperature in a warm, calm room. Wax is applied in several layers, and between approaches it is necessary to arrange breaks so that the layers have time to dry. Cover first with transverse movements, and then longitudinal. It is desirable that the agent does not fall outside the damaged area, and if this does happen, then you need to remove the wax with an ordinary napkin. After applying the last layer, the area to be treated must be lightly polished. In addition to filling scratches, such a pencil creates additional surface protection - but for this it is better to choose wax with increased hardness.
Umbrella holders can be difficult to stick to. In every accident he pays the consequences of consulting with someone experienced. I did not turn off my Mitsubishi and fell slightly to the front, - Dinrich Drmot from Khomutov gives an example. While the expert service estimated the price of the prize at twenty-five thousand crowns, I finally repaired ten thousand, we bought a light on the wreckage, the cabinet was straightened at home in the garage, the bumper was knocked down by a friend, and the varnish was completely masked. During normal driving, various scratches and abrasions occur on cars.
Most of them can only be removed by repairing the paint shop. More and more motorists are looking for a way to protect bumpers, hubcaps, doors, sills or mirrors from damage. On the Czech market, many companies sell special means body protection. But none of them has the same durability as. The car not only performs an aesthetic or advertising function. Due to their strength, they also provide protection against less severe damage to paint and salt used in winter period.
Before use, do not forget to shake the pencil slightly, and then close it with a cap so that the product does not dry out.
Coloring
Coloring is, of course, a much more detailed and complex process that requires special tools and materials. Any painting begins with cleaning the bumper, and it does not matter whether you are going to remove it or carry out all the work right on the spot. As in the previous case, the part must be washed, dried and degreased. To polish and remove the old coating, you will need a grinder, as well as sandpaper of varying degrees of grit.
What films are used to protect paints?
For increased body strength, they have proven to be strong up to 200 microns. They provide high protection for all parts of the car and do not change it appearance. This means that you do not have these foils registered in the technical license or in the whole case. It also brings other benefits.
Transparent clear film can be refurbished using abrasive trays and discs and classic car paint.
- Renovation can be repeated throughout the life of the car.
- After dismantling, there were no traces left on the body, and the paint looks like new.
- First you need to carefully machine the bumper around the entire perimeter, for hard-to-reach places you will need sandpaper, which we work by hand. Then a primer is applied to the surface in two layers, and the bumper is left to dry.
- When the composition hardens, the bumper is cleaned again and then you can start painting. In order for the color to lay down qualitatively, the part can be slightly heated beforehand.
- The paint is applied with a spray gun or a special gun. It will take about 3 layers, then the surface is varnished.
- For more complex damage, it is advisable to use a putty together with a primer.
Filling deep scratches
Why body protection paid off?
Application of a protective film to rear-view mirrors. Protective films prevent minor mechanical damage to the paint - smaller scratches, scratches, dots and scratches. They also help maintain the car's original color, appearance, and financial value. This way you don't have to decide the differences between the colors in different parts car after you spray the new varnish. The service life of protective films is at least 5 years. Of course, you can easily remove them and replace them with new ones at any time.
- That is why they are especially suitable for application on new varnishes.
- In addition, it helps maintain a uniform body color.
The use of putty requires additional time and manipulation. It is applied after the bumper has been cleaned, degreased and sanded with sandpaper or a machine.
- Putty is applied in a small layer on the scratch so that it fills all the damage. Then the area should be sanded. This must be done very carefully so that the surface does not become thinner.
- When the first layer becomes smooth and even, you need to repeat the procedure, this time smoothing the surface at a slower speed. Remember to use fine-grained sandpaper for difficult areas, as no power tool can replace manual work.
- After the surface has acquired its previous shape, a primer is applied on top in two layers and all the above manipulations with paint and varnish are performed.
- Then it will take at least a day to dry and it will be better if the part dries naturally to prevent its deformation.
Now you are not afraid to scratch the bumper, because in fact, repair is a fairly simple process in which you can do without the intervention of a specialist. The most important thing is to clearly follow the instructions and correctly calculate your skills.
Using protective film on cars
Front and rear bumper protection
Most often, during normal operation, the front and rear bumpers scratched. If you want to avoid scratches on these body parts, foil is perfect for you. They provide reliable protection against stones, salt and scratches during careless parking.Even a few small scratches on the front hood can negatively affect the overall look of the car. Together with the bumpers, the hood is most exposed to flying rocks. High quality protective films ensure that the front cap lacquer remains scratchy for years.
Video "How to eliminate scratches on a vehicle"(Be the first to rate)
- 22 319
- Dmitry Feschuk
On the bumper. Many people begin to worry about the question when a scratch appears on the bumper plastic, how to remove it and whether it can be done at home, since a scratched bumper not only spoils the driver’s image, but also general form at the car. It is about how to do this without leaving your home that will be discussed below.
Transparent transparent film is produced in two versions? . The first smaller scratches on any car threshold are often not even noticed. Over time, however, more will begin to grow. Sooner or later, the varnish will lose its beauty and luster. Therefore, we recommend protecting the door sills with foil for those who want to keep the original appearance of the car for as long as possible.
Foils are often also used to protect car doors? . Door scratches are most common in car parks and narrow aisles. Thanks to the protective film, you will be sure that even with frequent visits shopping centers and parking in the city, the doors of your car will not be decorated with small scratches or scratches.
Types of scratches
In order to figure out how to do it yourself, you need to have an idea of what they are.
Specialists in the field of car repairs distinguish the following types of them:
Based on this, repairs will take place.
Also used to protect rearview mirrors, fenders, front and rear lights, rear doors or grille?
- We will be happy to send an exact quote upon request.
- Only we.
- Quality films can also be used for protection or.
IMPORTANT. Repairing existing cracks in the bumper, if you master the right technology, is simple. But in order for this to work out with high quality, it is better to remove this part completely and place it on a separate illuminated stand or other hill so that the work process is clearly visible.
Repair of surface cracks or abrasions on the bumper
When a car enthusiast, during the next superficial examination of his car, finds some scuffs on this element of his car, he has a reasonable question, if he scratched the bumper, what should I do? Despite the fact that the scratch is small, it can be very conspicuous. The easiest way out is to go to the nearest car store and purchase.
Similarly, they use dishonest artists and force themselves to pay for painting. The following items are best purchased at a paint shop, which can be found in any major city. The spray matches the color of the car. The paint code is usually found on a sticker under the engine cover. If your vehicle has been previously painted, The best way unscrew the fuel tank choke and choose computer varnish, then ask the dealer to spray it. The minimum amount you can choose is 400 ml.
And that should be enough. If the paint is metallic, do you still need to buy a colorless spray? The spatula for the machine has the smallest capacity and spatula for its application. It may be the pace due to the price. To cut costs and because of the small amount we need, it's worth asking your friends if they have a spatula for the car.
It is inexpensive, but it will bring great benefits if the driver carries it with him. The process of getting rid of such a scratch will be as follows:
IMPORTANT. Work with a wax pencil is best done in a heated and calm room.
First, we must determine if a scratch is scratches or scratches. The scratch is not too deep and you can't see that the lining is there, however, there is a slight loss, the scratches are deep, you can see that the backing or the bare sheet in extreme cases is also dented. Once we know what we're dealing with, we can go to work. Removing Scratches Before proceeding with the following steps, try to remove the scratches on the abrasive paste. Apply the paste to a soft cloth and wipe with spherical movements, and then judge the effect.
If we see that the scratch disappears, we will apply the paste until it disappears without a trace. In this case, the following steps should be omitted. Place half of the sandpaper in the water bucket. The paper should be rinsed in a bucket of water to remove the abrasive surface.
Repair of medium depth cracks
Now we will talk about how to fix scratches on the bumper of a car that have an average penetration depth and damaged the paintwork.
