Laser engraving of phone keyboards. Laser engraving of letters on the phone keypad

If you have purchased new technology without Russian layout, bring it to us. We do Russification of the keyboard within 10-15 minutes, with high quality and at an affordable price.

Now, when choosing a laptop, you do not have to give up the model you like because it does not have Russian letters. No need to glue stickers, or fiddle with paper and tape. You just need to come to us and wait a bit. Our craftsmen have already made so many layouts that laptops themselves are asking for their hands.

Do not be afraid that the buttons in the keyboard are made of plastic, and the engraving is done by a laser. In spite of high temperatures, the beam very carefully burns out the top layer of material, drawing symbols. The result does not differ from the original English letters, and sometimes it turns out even better.

Important! When working, we do not disassemble the equipment, we do not remove the keys. The engraving is done on the assembled laptop and does not affect the internal electronics in any way.

The laser works according to a programmed command, which eliminates errors. Each letter will appear exactly where it should be. If desired, the thickness of the lines can be adjusted. During operation, the backlighting of the keys is preserved, the letters and numbers that were already on the laptop remain in their original form. Engraving is not paint that wears off over time and confuses a person at work, it is an eternal application that is not subject to time and mechanical stress.

Not only the keyboard of a laptop is engraved, but also a computer, phone, if desired, you can apply a drawing to a mouse. The color of the letters depends on the plastic from which the keys are made. Despite the small size of the images, the letters are of good quality and high resolution.

Laser engraving allows you to update the old keyboard when the drawn letters are erased, and the technique still works properly. Do not buy a new one because of poor quality application! Especially when you get used to the technique as if it were your own and you don’t want to adapt to the new one. We will give your keyboard a second life. This time it will last you longer.

We are talking about the Russification of the keyboard, but if necessary, you can apply the layout of any language, even hieroglyphs. In any case, we guarantee prompt work and high quality.

In addition to standard letters, a little beauty is applied to the keyboard. On the largest key, the space, engrave the name, initials, coat of arms, logo, emblem or small image. The same engraving is done on other parts of the laptop: on palei under the keyboard, on the lid. Your assistant will also become a reflection of your personality.

Keyboard engraving with a laser is the best solution if you want to get a quality result and a stylish looking thing. The image of letters obtained using this technology will never be erased, it will look no worse than the layout made at the factory. With our help, you can Russify any keyboard, as well as make it more beautiful by applying an original pattern.

Russification

Most often, laser engraving of the keyboard is required to apply the Russian layout to it. This procedure greatly simplifies the work with equipment purchased abroad. For example, we are often approached by people who want to laser engrave a Macbook keyboard ordered in the USA.

We apply letters using the font the client likes or the original font. Their color may vary depending on the material from which the keys are made:

• if you have a backlit keyboard, the engraving color will be white, like the English letters, and the Russian layout will also glow. In this case, the engraver removes a thin layer of paint from the surface of the plastic, thanks to which it is possible to achieve a high contrast of letters and preserve the glow, including Russian characters;
• if the keyboard is not backlit, then we can offer several color options. You can clarify the possibilities of choosing a shade from our consultants.

Engraving of Russian letters on the keyboard can be performed in your presence. You can choose any font - to your taste.

decoration

Laser engraving of the keyboard in Moscow may be required not only to Russify the key layout. We can apply patterns to the keyboard body, make dedicatory inscriptions, decorate buttons with drawings and interesting pictograms. Your imagination in choosing such decorations is not limited by anything, the main thing is that the decor does not impair the readability of the characters. In addition, we can personalize the gadget by putting on the keyboard the owner's name, company logo, information about the department where the device is used, etc.

We provide a security guarantee

The laser machine acts on a very thin layer of plastic on the surface of the material. It cannot harm the keyboard or deform the buttons in any way. So, despite the high efficiency of the impact and obtaining a stable pattern, you can not worry about the safety of expensive equipment. For all the time of our work, we have never had such problems.

We work with expensive equipment

We have experience with keyboards of various devices. There are dozens of fonts in the catalog, one of which you will definitely like. Including we have branded fonts that are used by the manufacturers themselves. With their help, you can make the Russian layout as authentic as possible. If you can't find a suitable style, bring your own. Our experts will make a layout for you using the font or image you sent, and show how the layout will look after the procedure is completed.

Every day it is gaining more and more popularity in the world of technology. One of the main directions of this technique is the Russification of laptop keyboards, mobile phones and other devices. And this is not surprising, because thanks to this industry, laser engraving has received great publicity and popularity.

Prices for Russification

Work examples:

Nowadays, almost every person owns one or even two devices that are equipped with a keyboard. And, as you know, after prolonged use, the letters on the keyboard are erased, which causes inconvenience and takes our precious time. There are some stickers that can be used to restore a damaged alphabet, but they cannot boast of their durability. And here laser engraving comes to the rescue, which allows you to Russify the Macbook keyboard or apply an image of any size for quite a long time, and this happens without any harm to the device itself.

When laser engraving plastics, the image is obtained by changing the color of the upper layer of the product, or by changing the surface structure.

There are several types of interaction between laser radiation and plastic, which takes place when the laptop keyboard is Russified.

Types of keyboard Russification

Foaming. At a low power of laser radiation, the material heats up, and a kind of gas bubbles form in it, due to which the structure and color of the source material changes. An example is a plastic stick, which, when constantly bent in different sides changes color, i.e. becomes lighter at the folds.

The next type or stage of interaction is engraving. As a result of this process, a relief image is formed on the surface of the device of interest to us, which is obtained due to the interaction of increased radiation intensity with plastic. Thus, the temperature of the plastic becomes higher than the melting point, which leads to its evaporation and the formation of grooves. This is how the Macbook keyboard is Russified.

Engraving with surface color change. If laser radiation with a relatively high power is applied to the material, the evaporation of the upper layer is supplemented by carbonization. That is, the place of engraving becomes darker.

And the last kind of interaction is discoloration. With a sufficient intensity of laser radiation, the molecules of substances disintegrate, which leads to a change in color. This interaction of substances is the most desirable, as it allows you to practically avoid heating and get the perfect engraving surface. But in this case a certain composition of plastic is needed, which will make it possible to apply laser radiation to itself.

Due to the frequent use of a laptop, the letters on the keyboard are erased, lose their initial view. In order to restore the symbols, you must use the engraving service. Users of Apple laptops also apply to this procedure, as they need to apply a Russian font. Engraving is one of the least expensive ways, which is distinguished by the accuracy and clarity of the symbol. But before using this procedure, you need to check the ratio of Latin characters with Russian ones, as well as print out the keyboard image. On it, you must definitely put the location of the letters that should be engraved.

Russification of the keyboard price

What is the Russification process?

In our company, laser engraving of the keyboard is carried out purely by means of computerized technology, which allows us to avoid mistakes. Moreover, a specially programmed laser machine automatically centers the applied engraving relative to the original value, so that the position of the engraved letters on each key is the same. As for the stages preceding engraving, it should be noted that in order to avoid inaccuracies, our experts clean the surface of the keys from external contaminants that can prevent a uniform hit laser beam. In addition, the Russification of the laptop keyboard largely depends on the competent selection of the font that will be used later. Thus, the process of selecting the best compatible solution is no less important than the subsequent engraving.

Which keyboards are suitable for engraving?

If you want to add appearance of your device by engraving the Cyrillic font, you should first familiarize yourself with the list of services offered by us in this area. Available to the client:

• phone keyboard engraving;
• laptop keyboard engraving;
• engraving letters on the keyboard of any other device, with a block of keys separate from the screen.

With regard to individual proposals, the client can carry out an order for engraving work, starting from his own design. An example of this is the engraving of the macbook keyboard, done in capital letters on thin, backlit keys!

When ordering an engravingyou can choose the color of the letters, symbols or picture, their size or font. Laser engraving of phones means endless possibilities, so your phone will definitely be original, unusual, and memorable. Today, engraving is popular - especially among those who want to stand out from the crowd.

Prices and lead times for laser engraving

Illuminated engraving

The price of engraving a backlit phone keyboard is >> 600 rubles.

The execution time of this service is approximately >> 5 minutes.

Case engraving

Case engraving is summed up from the cost of the minimum order in the amount of 500 rubles and the complexity of the individual order in the amount of 100 rubles and more. The final cost of engraving the phone case is from 500 rubles.

Engraving is carried out according to your layouts. Layouts must be submitted in vector graphics format. Fonts should be converted to curves accordingly. In the absence of the above requirements, perfect quality is not guaranteed. It is possible to make a layout on the fly. You explain your wishes to the master, he prepares, agrees with you on the spot and, upon approval, proceeds to print the prepared layout.

Non-standard work

Non-standard works >> are discussed by phone.

The cost of work is determined by the master >> from 500 rubles.