Cutting and processing of glass and mirrors. Tempered glass is the best choice for glass products

Before each person at least once in a life there was a problem of carrying out glass works. Glass is a material without which for many years it is difficult to imagine a modern room, whether it is a production facility, an office of a prestigious company, a shop or a residential building. Crockery, interior items, comfortable doors for office and kitchen cabinets, interior and balcony doors for this and many other things, this material has been used for a long time and quite justifiably. Glass is very controversial in nature.

Possessing many positive and necessary qualities: transparency, hardness, plasticity in the process of creation, impermeability to water and odors, and many others indispensable in everyday life and production, it has a significant drawback - fragility. As a result, often at the most inopportune moment, there is a problem of replacing door glass, the need to cut and paste new glass.

The fragility and complexity of the glass structure creates great difficulties when trying to cut it yourself. This capricious material strives to react to the slightest unsteadiness of an inexperienced hand, and instead of the planned straight line at the cut site, a broken line of an unpredictable configuration is obtained and everything has to be started all over again - on a new sheet of glass. Therefore, the most reliable and economical way to cut and replace glass has been and remains to contact a glass workshop. Such an enterprise specializing in glass cutting and installation is not only always ready to “give a helping hand” and organize fast and high-quality work by experienced glass cutters, but also offer to buy glass for a kitchen door, cabinet or other purposes.

Door glass is not only an additional source of lighting, but also an actual design element. If it crashed, you are given good opportunity Refresh the design of your home by inserting patterned glass that is most in harmony with the decoration of walls or furniture. You can buy glass with a pattern by looking at the catalog displayed on our website. Polish patterned bronze-colored glass will suit the interior with “antique” decor elements, and sylvite glass will perfectly fit into the “strict” hallway. Any glass yellow color creates a bright feeling sunny day, and krizet corrugated glass is the perfect solution for bathroom doors, showers or balconies. We will help you make a choice, cut and install glass in the door, saving you time and effort.

If you don’t know where glass is cut, how to place an order for glass for interior doors, glass for kitchen cabinet doors, if you want to inexpensively and creatively change the interior of your apartment using beautiful patterned glass, our workshop is always ready to help. By visiting our website, you will find out: where to buy door glass, where it is cut, you can clearly see glass samples in the catalog. The specialists of our company are always ready to accept your order for cutting and installing glass both in the electronic application form and by phone.

(Price: 570 r/sq.m. - wholesale; 655 r/sq.m. - retail)

Where to buy glass 2, 4, 5, 6 mm in Moscow?

Buying glass 2, 4, 5, 6 mm in Moscow is not difficult. The main thing is to find a good supplier. Company "Discount Glass" offers its customers high quality products in any design. Special attention we focus on new products, the best of which are already in our catalog. In addition, you can not only buy glass, but also order various processing options. That is, you get the whole range of services in one place.

Benefits of buying glass from DISCOUNT GLASS

• The largest range of glass in Moscow
• Own production
• Own fleet for delivery
• The best value for money

The cost of glass 2, 4, 5, 6 mm depends on the volume of the purchase. But the company's policy is designed in such a way that buying glass is beneficial not only for wholesale customers, but also for retail customers. An individual approach to each customer is guaranteed.
Our specialists will help you correctly calculate the prices for glass 2, 4, 5, 6 mm. They will take into account all your wishes, and will help to make right choice. Here you will find what you are looking for.

Cutting glass without edge processing in the presence of the customer from 15 minutes!

Always available figured, decorative and colorless glasses from 2 mm thick. up to 10 mm.,.

Our specialists carry out glass cutting to size with subsequent processing according to the customer's dimensions:

• rectilinear (rectangular glass element);
• curly (manufacturing of glass parts of complex geometric shapes from a rectangular blank).

Straight glass cutting price

We provide a glass cutting service in Moscow in the shortest possible time and inexpensively according to your size. You will receive a finished order, packed for transportation.

This is convenient for those who need to cut glass for:
• Dachas;
• in the window frame;
• Greenhouse glazing;
• Replacements in the window;
• interior doors;
• Kitchen facade, etc.

We are located near the metro station Airport, so you can easily get to us, both by car and by public transport not only from the center of Moscow, but also from any metro.

Process

The process consists in manufacturing a glass part of the required shape and dimensions. The most common are roller and diamond glass cutters. We use a roller glass cutter at home, as it is easy to use and affordable. A diamond glass cutter is much more expensive than a roller glass cutter; working with it requires special skills and experience. It is this tool that is used by our workshop for works of any complexity.

Stages

The first stage is markup. To begin with, the glass blank is thoroughly cleaned, removing dust, dirt, and all kinds of plaque. The sheet is placed on a flat horizontal surface. Marking is carried out using a glass marker and precision measuring instruments. It is important to mark up in such a way that the amount of waste is minimal.

The second stage is directly cutting. A distance equal to half the width of the diamond glass cutter block recedes from the line marked with the marker, and a thick ruler is applied. The master holds the glass cutter in his hand like a ballpoint pen, having determined the optimal position. The diamond must be perpendicular or nearly perpendicular to the plane of the glass. The scratch is drawn with a smooth movement of the glass cutter towards itself, slightly pressing the tool against the glass.

Third stage. If the dimensions of the part allow, then it is broken by hand. If the element is very narrow, you should use a special tool similar to pliers, but with rubberized tips.

Moscow, st. Krasnoarmeyskaya, house 21. m. Airport

Workshop Glass-Profi offers its customers to buy glass of any size. You can order products from us for any purpose: to equip a table, restore a wardrobe, decorate horizontal and vertical surfaces. Trade in both wholesale and retail parties is carried out. It is possible to cut glass, artistic processing of edges and surfaces: polishing, cutting, grinding, sandblasting, falsetto, etc.

The price of glass to order starts from 450 rubles!*

* The cost implies the order of glass 4 mm. thick, size - 1605x2550. Fitting to the required parameters and packaging with stretch film is free of charge.

Prices may vary slightly depending on the complexity of the work and terms. We guarantee that each order will be executed as soon as possible, whether it is a table or a small piece, necessary to perform a decorative reception.

Durable glass is accompanied by a guarantee for up to 10 years. For regular customers - cumulative discounts!

Any sizes and types of glass to order. Choose your best option:

Transparent. A common product of the glass industry, widely used for its utility. The price for it is minimal;

Patterned glass. In its production, any decorative technique can be used: engraving, matting, drawing drawings in other ways according to the customer's sketch. Cost - 870 rubles. for a product, the size of which is 1420x2160mm, thickness - 4mm;

Colored glass . They can decorate the table and other surfaces. Colored products will originally fit into any interior, the price will not become an obstacle to the purchase - only 650 rubles. per sq.m!

Matte glass. Opaque products in white or colored shades. Customized to the size of the customer, can be decorated with inscriptions, images. Price - 1200 rubles. for a sheet of standard thickness, specifications: 1605x2550 .;

Optiwhite glass. An ideal translucent material for equipping window openings, shop windows. Durable glass practically does not delay the rays, does not change the angle of their incidence, which makes it possible to achieve amazing invisibility of such custom-made glass. Cost - 750 rubles. in the size 2250x3210.

Safe, durable glass with an almost incalculable period of operation. Any size

We offer consumers glass and mirrors of all thicknesses. Products have found application in various areas of human life. Glass is also used in construction, in the design of an apartment, as well as at all stages of interior decoration.

Sheet glass of grades M1 and M2 is used for the manufacture of window glass and double-glazed windows, has a smooth glossy surface, devoid of optical distortion. The light transmittance of such glass is as high as possible. The highest quality - polished glass is obtained by the float method. Float glass is made by pouring molten material onto metal, after which the glass goes through the necessary manufacturing procedures. The Steklosektor company uses only glass of the M1 and M2 brands for work. Marks M3, M4 can be ordered when cutting large volumes and under the order.

You can always order glass according to your dimensions with a thickness from 2 to 19 mm. You can cut window and display glass according to your size. The company "Steklosektor" carries out glass cutting according to your size, as well as glass processing and glass tempering.

There is a flexible system of discounts, which depends on cutting and size. In the price list current prices are indicated when ordering from 20m2 one material. In the presence of glass sizes, check the cost with our operators. When ordering more than 50m2, additional discounts are possible depending on the cutting. For an accurate calculation - please send applications by mail

GLASS TINTED

SATINATE, frosted glass

Satin is a decorative glass with matte surface on one or both sides of a sheet obtained by chemical etching.

Triplex belongs to the group of safety protective glasses, as it has increased strength, and when broken (strong impact), glass fragments do not scatter, but remain on the adhesive layer.

EDGING

FACET MANUFACTURING

DRILLING HOLES

GLASS EDGING

450 8 500
10 600
12 1700 15 2000 19 Polishing 1 p.m. processing 1 p.m. processing

UV GLUING

OTHER

Glass cutting 2 mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm is carried out according to the customer's size. Can be ordered .

*When working with glass, the following extra charges apply:

• For ovals, circles, curved products +30%
• Internal cutouts +60%
• Side cutout for a loop 500 rubles / pc.
• Urgent works +40%
• When processing LARGE SIZES of glass (side > 2000mm) +30%
• When processing SMALL SIZES of glass (side< 300мм) +30%
• Trimmings of rectangular glass are not paid by the customer.
• The minimum order value is 500 rubles.
• Unloading products manual 20% of the cost of the product for the 1st floor.

The company provides services for glass cutting, glass processing, glass tempering, glass ultraviolet gluing. We carry out delivery and installation work.